三位元多工器 結構模式

module top;

wire [2:0]A, B,OUT
wire SEL;
system_clock #100 clock1(A[0]);
system_clock #100 clock2(A[1]);
system_clock #100 clock3(A[2]);
system_clock #200 clock4(B[0]);
system_clock #200 clock5(B[1]);
system_clock #200 clock6(B[2]);
system_clock #400 clock7(SEL);

mux2 M1  (OUT, A, B, SEL);
endmodule

module mux(OUT, A, B, SEL);

output OUT;
input A,B,SEL;

not I5 (sel_n, SEL) ;
and I6 (sel_a, A, SEL);
and I7 (sel_b, sel_n, B);
or I4 (OUT, sel_a, sel_b);
endmodule

module mux2(OUT, A, B, SEL);
output [2:0] OUT;
input [2:0] A,B;
input SEL;
mux hi (OUT[2], A[2], B[2], SEL);
mux middle (OUT[1], A[1], B[1], SEL);
mux lo (OUT[0], A[0], B[0], SEL);
endmodule


module system_clock(clk);
parameter PERIOD=100;
output clk;
reg clk;

initial clk=0;

always
 begin
#(PERIOD/2) clk=~clk;
 end

always@(posedge clk)
 if($time>1000)$stop;

endmodule